Methyl Sulfonate Latex（EPMC）

Methyl Sulfonate LatexMethyl Sulfonate latex（EPMC）

Product Description:

Methyl sulfonate latex can aggregate cement particles into film, reduce the permeability of mud cake, and fully guarantee the pumping fluidity and displacement efficiency of cement slurry.At the same time, the conventional performance of cement slurry is better than the slurry, with obvious characteristics of rapid coagulation, early strength, low water loss, right-angle thickening, etc., which can not only ensure the dynamic water retention of cement slurry, but also improve the cementation performance between cement ring, casing and formation.

Performance advantages:

1. Minimize the ring gap between cement ring and stratum and casing, and reduce the cracks and sand holes caused by cement drying;2, excellent rheological properties, can avoid the occurrence of gas channeling phenomenon;3. Good toughness can improve the dynamic mechanical properties of cement slurry, improve the dynamic impact resistance of cement ring against perforation (fracturing, etc.), and reduce the probability of damage of cement ring during perforation or drilling;4. Improve the compactness and permeability of cement slurry, improve the corrosion resistance, and help delay the life of production Wells.Usage and recommended dosage: good compatibility with cement slurry and other cement slurry additives;5. Add 17.5mL of NaCL, 20% of 332mL, and mix for 10 minutes.Foam disappears in 60 seconds;At 160 degrees Fahrenheit (72 + 2 ℃) in the furnace for 16 hours, no layered mixture are removed.Recommended dosage: 5% - 10%.

 Technical Specification:

Usage and dosage:

Recommended dosage: 5% - 10%.