SVES Oilfield Supply Co., Ltd Supplied 15000psi four-ram blowout preventer and blowout preventer box

Recently, SVES Oilfield Supply Co., Ltd, at an oilfield application site, SVES supplied 5.12”-15000psi four-ram blowout preventer and blowout preventer box. Since they were put into use, they have been running normally and achieved good application results in the complex geological environment of high temperature, high pressure, andFour Ram Blowout Preventer high sulfur.

In 2014, SVES Oilfield Supply Co., Ltd supplied the first coiled tubing blowout preventer, and in 2021, it supplied 15K coiled tubing blowout preventer group. In just two years, the products have been successfully used in multiple oilfields and received high praise from customers. Over the years, SVES coiled tubing blowout preventer has been successfully used in major oilfields at home and abroad. At present, the specifications of SVES coiled tubing blowout preventer group have been fully covered, with a diameter range of 2 9/16”-7 1/16”, and the maximum rated working pressure of 15000psi (103.5MPa)

The coiled tubing blowout preventer group is the core equipment to ensure safe production. It closes the wellhead during drilling, testing, workover, and completion operations. It is a safe sealing well control device to prevent blowout accidents. It can choose various product specifications according to the operation type and environment.

The coiled tubing blowout preventer group consists of a blowout preventer box and a four-ram coiled tubing blowout preventer, which are installed on the coiled tubing operation vehicle.

The blowout preventer box is a wellhead pressure-sealing device. Under the action of hydraulic pressure, the sealing rubber core in the blowout preventer box tightly wraps the coiled tubing. When the coiled tubing is pulled out or lowered, it can still achieve effective sealing between the wellhead and the coiled tubing.

The four-ram coiled tubing blowout preventer has four ram chambers, which are equipped with full seal, shear, cav, and half seal rams from top to bottom. When the coiled tubing is in a static state, it controls the hole pressure.