How To Avoid Excessive Noise From Trenchless Drill Pipes?

How To Avoid Excessive Noise From Trenchless Drill Pipes?

The drill pipe of a rotary drilling rig will generate noise during operation, which is actually a normal mechanical sound. If the sound of the drill pipe of a rotary drilling rig is too high, it will form noise. The greater the noise, the greater the damage to the drill pipe and vibration equipment of the rotary drilling rig. So, how to avoid excessive noise from trenchless drill pipes?

Measures to avoid excessive noise from the drill pipe of a rotary drilling rig:

1. First, check whether the anchor bolts of the drill pipe of the rotary drilling rig are tightened. If not, tighten the anchor bolts in time to prevent the noise caused by the loosening of the drill pipe bolts of the rotary drilling rig during operation.

2. Check whether the bearings of the drill pipe of the rotary drilling rig are abnormal. If the bearings are short of oil, oil should be added in time. If the bearings are broken, the bearings should be replaced in time to avoid noise caused by lack of oil or damage to the drill pipe bearings of the rotary drilling rig.

3. Check whether there is a collision around the protective cover of the drill pipe of the rotary drilling rig, causing friction and noise from the protective cover.

Advantages of trenchless drill pipes:

1. Using advanced processing equipment, processing technology and tooling manufacturing, matching multiple sets of drill pipes for many brands of drilling rigs.

2. The drill rod is light in weight, high in strength, with high straightness of single-section drill rod, thin pipe wall, small interval between pipes, and good wear resistance of tooth plate. It greatly meets the special requirements of drilling rigs for drill rods.

3. The outer teeth made of alloy steel have high hardness, high toughness and good welding performance after special heat treatment, which greatly improves the wear resistance of the tooth plate, thereby reducing the failure rate and maintenance cost of the drill rod.

4. The drill rod has friction type, machine lock type and combination type, and the length is determined according to the actual needs of the user and combined with the parameters of the drilling rig.

5. The material specifications are complete, and the drill rod can be matched with any type of domestic or imported drilling rigs in China. The drill rods are all used for full torque, and the maximum drilling depth can reach more than 100 meters. The price is much lower than that of imported drill rods from abroad.